國家衛生研究院 NHRI:Item 3990099045/12919
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 12145/12927 (94%)
造訪人次 : 912546      線上人數 : 1228
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋
    主頁 ‧ 登入 ‧ 上傳 ‧ 說明 ‧ 關於NHRI ‧ 管理 到手機版


    請使用永久網址來引用或連結此文件: http://ir.nhri.org.tw/handle/3990099045/12919


    題名: Elimination of spurious velocities generated by curvature dependent surface force in finite element flow simulation with mesh-fitted interface
    作者: Ivančić, F;Sheu, TWH;Solovchuk, M
    貢獻者: Institute of Biomedical Engineering and Nanomedicine
    摘要: It is known that spurious non-physical velocities can occur when one employs the finite element method for simulation of incompressible flows subjected to external forces. In presence of external body forces, the main reason for this is the incompressibility constraint that is satisfied only in a weak sense against test functions from the pressure function space. In case of the two-phase (incompressible) immiscible flow, a surface force, which is a function of the interface curvature, arises and introduces additional problematics to the finite element model. Due to discrete representation of the interface, the question arises on how to approximate the curvature. A particularly natural approach for the finite element method employs the Laplace–Beltrami operator which allows to express the mean curvature in a weak sense. However, once incorporated into the equations governing the fluid flow, Laplace–Beltrami-reconstructed curvature may introduce spurious non-physical forces at the interface if finite element spaces are chosen arbitrarily. The reason for this is that the test space used for curvature calculation is the test space associated with the velocity field. We show that it is necessary for the function space used for the geometry construction to be of the order equal to or higher than the order of the test space involved in curvature evaluation. This leaves two possibilities for practical fluid flow problems: use the same function spaces for the mesh geometry and the velocity field (isoparametric concept) or decouple the curvature calculation from the main problem.
    日期: 2020-12-01
    關聯: Computer Methods in Applied Mechanics and Engineering. 2020 Dec 1;372:Article number 113356.
    Link to: http://dx.doi.org/10.1016/j.cma.2020.113356
    JIF/Ranking 2023: http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=NHRI&SrcApp=NHRI_IR&KeyISSN=0045-7825&DestApp=IC2JCR
    Cited Times(WOS): https://www.webofscience.com/wos/woscc/full-record/WOS:000593764800011
    Cited Times(Scopus): https://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=85089739871
    顯示於類別:[馬克沁] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    SCP85089739871.pdf4643KbAdobe PDF302檢視/開啟


    在NHRI中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋