國家衛生研究院 NHRI:Item 3990099045/5251
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 12189/12972 (94%)
造訪人次 : 956100      線上人數 : 791
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋
    主頁 ‧ 登入 ‧ 上傳 ‧ 說明 ‧ 關於NHRI ‧ 管理 到手機版


    請使用永久網址來引用或連結此文件: http://ir.nhri.org.tw/handle/3990099045/5251


    題名: Fabrication of a SU-8-based polymer-enclosed channel with a penetrating UV/ozone-modified interior surface for electrokinetic separation of proteins
    作者: Chang, CJ;Yang, CS;Lan, LH;Wang, PC;Tseng, FG
    貢獻者: Center for Nanomedicine Research
    摘要: This paper introduces electrokinetic separation inside fully cross-linked epoxy-based polymer channels that were batch modified on the inner surfaces using a penetrating UV/ozone treatment from the outside. The treatment can employ either a 254 nm UV source in an ozone-rich environment or a stand-alone 172 nm UV source to directly generate C=O hydrophilic functional groups on the embedded polymer channel wall surfaces. Short-wavelength UV radiation was employed to break polymer surface bonds inside the channel. Ozone generated directly from air or supplied externally oxidized the reaction site on the activated polymer surface to generate the desired functional groups. An epoxy-based photoresist compound, SU-8 (MicroChem, MA), which is widely used in microfluidic systems, was employed to demonstrate the surface modification. Fourier transform infrared spectroscopy (FTIR) and high resolution x-ray photoelectron spectroscopy (HRXPS) were employed to characterize the functional groups that formed after the UV/ozone surface modification and to confirm the formation of O-H functional groups from the phenol group covalently bonded to the SU-8 surface, attributed mostly to the surface hydrophilicity modification. Water contact angles on the modified surface ranged from 72 degrees to 12 degrees depending on the processing time, UV power and ozone concentration. These angles were retained for at least 4 weeks after the process. Finally, the inner wall surfaces of the SU-8-enclosed channels were successfully modified using this technology, and rapid water transportation and EOF pumping were visualized inside the channel after surface modification. Successful electrokinetic separation of 10 mM BSA and 10 mM anti-rabbit IgG labeled with FITC inside the channel was also carried out. The polymer channel revealed a surface charge density of 75% of the zeta potential on a microslide glass surface, indicating the potential for molecule separation using polymer channels instead of glass channels. This simple process provides a novel way to integrate surface modification into microfluidic structures after fabrication for fully polymer-based lab-on-a-chip systems.
    日期: 2010-11
    關聯: Journal of Micromechanics and Microengineering. 2010 Nov;20(11).
    Link to: http://dx.doi.org/10.1088/0960-1317/20/11/115031
    JIF/Ranking 2023: http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=NHRI&SrcApp=NHRI_IR&KeyISSN=0960-1317&DestApp=IC2JCR
    Cited Times(WOS): https://www.webofscience.com/wos/woscc/full-record/WOS:000283691600032
    Cited Times(Scopus): http://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=78649724562
    顯示於類別:[楊重熙] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    ISI000283691600032.pdf6238KbAdobe PDF254檢視/開啟


    在NHRI中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋