國家衛生研究院 NHRI:Item 3990099045/10090
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 12189/12972 (94%)
造訪人次 : 955697      線上人數 : 784
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋
    主頁 ‧ 登入 ‧ 上傳 ‧ 說明 ‧ 關於NHRI ‧ 管理 到手機版


    請使用永久網址來引用或連結此文件: http://ir.nhri.org.tw/handle/3990099045/10090


    題名: Preparation and characterization of a biodegradable polyurethane hydrogel and the hybrid gel with soy protein for 3D cell-laden bioprinting
    作者: Lin, HH;Hsieh, FY;Tseng, CS;Hsu, SH
    貢獻者: Institute of Cellular and Systems Medicine
    摘要: 3D printing shows great potential for fabricating customized scaffolds for tissue regeneration. Using hydrogel as a bioink for cell printing provides a biological platform for basic research and potential medical treatments. In this study, a waterborne poly(e-caprolactone) (PCL)-based biodegradable polyurethane (PU) with a soft segment replaced with 20 mol% of poly(L-lactide) (PLLA) diol or poly (D, L-lactide) (PDLLA) diol was prepared. These two PUs formed compact packing structures at temperatures >= 37 degrees C. They responded differently to temperature changes and the presence of electrolytes because of the difference in the free volume. With their thermal-responsive properties, both PU dispersions could form a gel in 3 min with the gel modulus reaching about 6-8 kPa after 30 min. To enhance the structural integrity during layer-by-layer deposition, the hybrid hydrogel of PU and soy protein isolate (PU/SPI hybrid) was further developed. The PU/SPI hybrid dispersion could undergo rapid gelation at 37 degrees C with the modulus reaching 130 Pa in 1 min. Moreover, the PU/SPI hybrid gel was readily blended with cells and printed at 37 degrees C without preheating. Neural stem cells (NSCs) were embedded in the hydrogels and analyzed for cell viability, metabolism, proliferation, and gene expression of neural-related markers. Cells cultured in the PU/SPI hybrid construct had better survival and proliferation than those in the PU gel. The PU/SPI hybrid ink may provide unique rheological properties for direct cell/tissue printing at 37 degrees C and a biomimetic microenvironment for cell survival, growth, and differentiation.
    日期: 2016-11-07
    關聯: Journal of Materials Chemistry B. 2016 Nov 07;4(41):6694-6705.
    Link to: http://dx.doi.org/10.1039/c6tb01501h
    JIF/Ranking 2023: http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=NHRI&SrcApp=NHRI_IR&KeyISSN=2050-750X&DestApp=IC2JCR
    Cited Times(WOS): https://www.webofscience.com/wos/woscc/full-record/WOS:000386336300008
    Cited Times(Scopus): http://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=84992209641
    顯示於類別:[徐善慧] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    ISI000386336300008.pdf2958KbAdobe PDF341檢視/開啟


    在NHRI中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋